Product Reviews

VIVO STAND-V011H Review: An Extra Tall Stand for a Single Monitor

A freestanding option for buyers who want to elevate one compatible monitor and adjust its viewing angle, with height changes suited to occasional repositioning.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The VIVO Extra Tall Single Monitor Desk Stand review is for anyone looking to raise one compatible screen on a freestanding base, without attaching a mount to the desk edge.

Its tall pole and broad range of viewing adjustments offer flexibility, while vertical repositioning takes a manual adjustment rather than a quick lift.

VIVO Extra Tall Stand Review Summary

The quick verdict

VIVO STAND-V011H
4.5/5

5,000+ ratings

Read Amazon Reviews

VIVO STAND-V011H

A freestanding option for buyers who want to elevate one compatible monitor and adjust its viewing angle, with height changes suited to occasional repositioning.

  • Fits one 13- to 27-inch monitor weighing up to 22 pounds.
  • Requires a 75 × 75 mm or 100 × 100 mm VESA mounting pattern on the monitor.
  • Uses a freestanding steel base and a 40-inch center pole.
  • Offers +45° to −45° tilt, 180° swivel, and 360° rotation.

Pros

  • Freestanding base can work where a desk-edge clamp is not a good fit.
  • Tall pole and several articulation options give buyers room to set a raised screen and choose its orientation.

Consider before buying

  • Height changes require manual bolt adjustment, which is inconvenient for frequent repositioning.
  • The 27-inch and 22-pound limits rule out larger or heavier displays.
Read the full review summary

The STAND-V011H holds one 13- to 27-inch monitor weighing up to 22 pounds, provided it has a 75 × 75 mm or 100 × 100 mm VESA pattern.

Its 40-inch pole gives the stand extra height potential, and the bracket supports tilt, swivel, and screen rotation for tailoring the viewing angle.

This design suits a fixed desk setup where a raised screen and a freestanding base are useful. Cable management and included assembly hardware help round out the package.

Buyers who often move a monitor up and down should account for the bolt adjustment: it must be loosened and tightened, so this is not intended for fluid, frequent height changes.

The buying factors

VIVO Extra Tall Stand Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Single-screen compatibility

Supports monitors from 13 to 27 inches and up to 22 pounds when they use one of the two listed VESA patterns.

8/10

Height potential

The 40-inch pole offers substantial height range, although moving the bracket requires loosening and tightening its bolt.

8/10

Viewing-angle adjustment

Tilt, swivel, and full rotation support several screen orientations and viewing angles.

8/10

Desk placement flexibility

A freestanding base avoids relying on a desk-edge clamp, which can suit desks where clamping is inconvenient.

5/10

Frequent repositioning

The height adjustment is specifically not designed for fluid, frequent vertical movement.

7/10

Assembly support

The open-top VESA plate system and supplied hardware are intended to make mounting straightforward.

Key Features and Specifications of VIVO Extra Tall Stand

  • Fits one 13- to 27-inch monitor weighing up to 22 pounds.
  • Requires a 75 × 75 mm or 100 × 100 mm VESA mounting pattern on the monitor.
  • Uses a freestanding steel base and a 40-inch center pole.
  • Offers +45° to −45° tilt, 180° swivel, and 360° rotation.
  • Allows height adjustment along the pole; a bolt must be loosened and tightened to change height.
  • Includes cable management and hardware for assembly; the product carries a three-year warranty.

Pros and Cons of VIVO Extra Tall Stand

Pros

  • Freestanding base can work where a desk-edge clamp is not a good fit.
  • Tall pole and several articulation options give buyers room to set a raised screen and choose its orientation.
  • Broadly covers common monitor sizes from 13 to 27 inches, subject to weight and VESA compatibility.
  • Cable management and a slide-in VESA plate system help keep setup organized.

Consider before buying

  • Height changes require manual bolt adjustment, which is inconvenient for frequent repositioning.
  • The 27-inch and 22-pound limits rule out larger or heavier displays.
  • Buyers need to check the monitor's VESA pattern and whether the base footprint suits their available desk space.

Who Should Buy VIVO Extra Tall Stand?

Good fit

Consider the VIVO STAND-V011H if you want one monitor raised on a freestanding stand and expect to leave its height mostly in place.

Its 40-inch pole, broad tilt and rotation options, and cable management make it a practical fit for a workstation that needs a configurable viewing angle without a desk-edge mount.

Before buying, check the monitor's size, weight, and VESA mounting pattern.

Also measure the desk area for the base and think through the target screen height before installation, since changing height later means loosening and retightening the bracket bolt.

Who should skip it

Skip this stand if your monitor exceeds 27 inches or 22 pounds, or lacks a 75 × 75 mm or 100 × 100 mm VESA pattern.

It is also a poor match for a setup where you expect to move the screen vertically throughout the day.

How the VIVO Extra Tall Stand fits a fixed monitor setup

Height that favors a settled position

The tall pole gives the bracket room to sit higher than a short desktop riser might allow.

But the bolt-based adjustment affects the day-to-day experience: decide on a comfortable height during setup if you want to avoid repeated loosening and retightening.

Check compatibility before assembly

Screen size alone does not establish fit. Confirm that the monitor weighs no more than 22 pounds, measures between 13 and 27 inches, and has a 75 × 75 mm or 100 × 100 mm VESA pattern.

Checking those points first can prevent a mismatch after the stand is assembled.

A freestanding base has its own footprint

The base keeps installation independent of a desk-edge clamp, which can be useful when clamping is unsuitable.

In return, it occupies space on the desktop; measure the intended spot and consider how the monitor will sit relative to the base before committing to a layout.

Articulation for choosing a screen orientation

Tilt, swivel, and 360-degree rotation let you choose a viewing angle and switch between landscape and portrait positioning.

These adjustments are useful for setting a screen to a particular task, while the stand's design favors occasional height changes over constant movement.

Alternatives to VIVO Extra Tall Stand

Computer Monitor Arms alternative

VIVO STAND-V001 Single Monitor Desk Mount
4.5/5

20,000+ ratings

Read Amazon Reviews

VIVO STAND-V001 Single Monitor Desk Mount

Choose the STAND-V011H if you want a freestanding base and your screen fits its 27-inch limit.

The STAND-V001 is a better fit if your display is larger, or if you prefer a clamp or grommet mount and want the listed 16-inch adjustment range.

  • The STAND-V001 is a desk-mounted single arm for compatible monitors up to 38 inches and 22 pounds.
  • It attaches with a C-clamp or grommet mount and provides up to 16 inches of height adjustment along its pole.
  • The STAND-V011H is a freestanding stand with a 40-inch pole, supports monitors up to 27 inches, and requires bolt adjustment for height changes.

Computer Monitor Arms alternative

VIVO STAND-V002 Dual Monitor Desk Mount
4.6/5

60,000+ ratings

Read Amazon Reviews

VIVO STAND-V002 Dual Monitor Desk Mount

Pick the STAND-V011H for a single screen and a freestanding setup. The STAND-V002 suits buyers who need to mount two compatible monitors and can install a clamp or grommet mount on the desk.

  • The STAND-V002 mounts two 13- to 30-inch screens weighing up to 22 pounds each.
  • It uses a desk-edge C-clamp or optional grommet mount and provides tilt, swivel, and rotation adjustments.
  • The STAND-V011H is designed for one screen on a freestanding base, with a maximum supported screen size of 27 inches.

Is VIVO Extra Tall Stand Worth It?

The VIVO STAND-V011H is worth considering if your monitor fits its size, weight, and VESA limits, and you want a raised screen on a freestanding base.

Its height and angle options make it adaptable during setup, while the cable management and three-year warranty add practical value.

Its key compromise is the bolt-based height adjustment, which is not designed for frequent movement.

Measure the base area and settle on a working height before assembly; if that suits your routine, this stand is a sensible option for a fixed single-monitor workstation.

Your review at a glance

VIVO STAND-V011H
4.5/5

5,000+ ratings

Read Amazon Reviews

VIVO STAND-V011H

A freestanding option for buyers who want to elevate one compatible monitor and adjust its viewing angle, with height changes suited to occasional repositioning.

  • Fits one 13- to 27-inch monitor weighing up to 22 pounds.
  • Requires a 75 × 75 mm or 100 × 100 mm VESA mounting pattern on the monitor.
  • Uses a freestanding steel base and a 40-inch center pole.
  • Offers +45° to −45° tilt, 180° swivel, and 360° rotation.

Written by

tedxtransmedia.com Editorial Team

Editorial team

Independent editorial coverage of storytelling across media.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

VIVO STAND-V011H

VIVO STAND-V011H

A freestanding option for buyers who want to elevate one compatible monitor and adjust its viewing angle, with height changes suited to occasional repositioning.

  • Fits one 13- to 27-inch monitor weighing up to 22 pounds.
  • Requires a 75 × 75 mm or 100 × 100 mm VESA mounting pattern on the monitor.
Check Video Reviews on Amazon