The SmallRig Adjustable Articulating Magic Arm review is for creators who want to position a monitor, light, or microphone at a chosen angle without adding a clamp to their rig.
The 9.8-inch arm uses two 360-degree ball heads and 1/4-inch screws at both ends, making it most compelling for compatible accessories with modest weight.
SmallRig Magic Arm Review Summary
The quick verdict

1,000+ ratings
Read Amazon ReviewsSmallRig 2066B Adjustable Articulating Magic Arm
A flexible short arm for camera creators who need to position a lightweight monitor, light, or microphone from a 1/4-inch mount.
- 9.8-inch articulating arm with a double 360-degree ball-head design.
- 1/4-inch screw threads at both ends for compatible accessories and support points.
- Designed for positioning items such as on-camera flash lights, microphones, LCD monitors, and video monitors.
- An O-ring rubber cushion at the screw is intended to help protect a monitor from scratches and improve the tightness of its connection.
Pros
- Dual ball heads provide flexible orientation at both ends of the arm.
- A 9.8-inch reach can place an accessory away from the camera body or support point.
Consider before buying
- The 213 g maximum recommendation rules it out for many heavier monitors, lights, or accessory combinations.
- Both ends use 1/4-inch screws, so a buyer needs compatible threaded mounting points or adapters.
Read the full review summary
SmallRig’s 2066B is a straightforward positioning link: attach one end to a cage, rail, handle, or other compatible support, connect an accessory at the other, and use the dual ball-head design to adjust its orientation.
An O-ring cushion at the 1/4-inch screw is intended to protect a monitor surface and help the connection lock more tightly.
It suits camera operators building a compact rig around lightweight accessories and existing 1/4-inch attachment points.
The key constraint is its maximum recommended load of 213 g, so buyers should check the combined weight of the accessory and any attached parts before relying on the arm.
The buying factors
SmallRig Magic Arm Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle flexibility
Dual ball heads rotate 360 degrees, giving a broad range of positioning options.
Mount compatibility
Both ends use 1/4-inch threads, which fit many camera-rig accessories but require matching connections.
Reach
The 9.8-inch length offers useful separation from a mounting point while remaining a compact arm.
Accessory protection
The O-ring cushion is a useful contact detail for a monitor mounted to the arm.
Load suitability
The 213 g maximum weight recommendation limits it to light accessories and calls for careful weight checks.
Rig simplicity
It provides an adjustable link without requiring a separate clamp when the rig already has a compatible 1/4-inch mount.
Key Features and Specifications of SmallRig Magic Arm
- 9.8-inch articulating arm with a double 360-degree ball-head design.
- 1/4-inch screw threads at both ends for compatible accessories and support points.
- Designed for positioning items such as on-camera flash lights, microphones, LCD monitors, and video monitors.
- An O-ring rubber cushion at the screw is intended to help protect a monitor from scratches and improve the tightness of its connection.
- Maximum weight recommendation: 213 g.
- Listed weight: 0.21 kg; the package quantity is one arm.
Pros and Cons of SmallRig Magic Arm
Pros
- Dual ball heads provide flexible orientation at both ends of the arm.
- A 9.8-inch reach can place an accessory away from the camera body or support point.
- The 1/4-inch connections are suited to common camera-rig mounting setups.
- The O-ring cushion adds a protective contact surface where an accessory is attached.
Consider before buying
- The 213 g maximum recommendation rules it out for many heavier monitors, lights, or accessory combinations.
- Both ends use 1/4-inch screws, so a buyer needs compatible threaded mounting points or adapters.
- The arm’s reach and two articulated joints may take space in a compact setup; check the intended mounting position and clearance.
Who Should Buy SmallRig Magic Arm?
Good fit
Consider the 2066B if your setup has 1/4-inch mounting points and you need to reposition a lightweight monitor, microphone, or light.
Its dual ball heads give you room to angle the accessory, while the 9.8-inch length can help move it into a more useful position relative to the camera.
Before choosing it, weigh the accessory together with any attached parts and keep the total within the 213 g recommendation.
Also confirm that the mounting points have the right 1/4-inch thread and that the arm’s length fits the space available on your rig.
Who should skip it
Skip this arm if your accessory setup exceeds the 213 g maximum recommendation, or if you need a clamp included to attach the arm to a desk, rail, or tube.
Check the mounting hardware required for your particular rig before buying.
What the SmallRig Magic Arm Means for a Camera Rig
Articulation at both ends
The two 360-degree ball heads let you change the orientation at either end, which can be useful when the camera support and accessory do not line up neatly.
This gives the arm flexibility in placement, though buyers should consider how the articulated joints and accessory will sit together in the final rig.
Thread matching matters
A 1/4-inch screw at each end makes the arm a connector between compatible threaded points.
It does not include a clamp in the described package, so a buyer planning to attach it to a tube, desk edge, or other unthreaded surface should account for the separate mounting hardware needed.
Keep the load light
The stated maximum weight recommendation is 213 g, which defines the clearest limit for choosing accessories.
Check the weight of the complete mounted assembly, not just the monitor or light by itself, and leave room for any adapters or other pieces in the setup.
The cushion’s practical role
An O-ring rubber cushion around the screw can provide a softer contact at the monitor connection and is intended to help the accessory lock more tightly.
It is a helpful design detail, but buyers should still make sure the connection is properly threaded and secured for their own configuration.
Alternatives to SmallRig Magic Arm
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 Magic Arm Clamp Kit
Choose the 2066B when you already have compatible threaded mounting points and want only the arm.
Consider the 2732 when you need a clamp as part of the kit and the clamp’s stated jaw range matches the surface you plan to attach to.
- The 2732 pairs a 9.8-inch articulating arm with a super clamp that opens from 15 mm to 54 mm, and includes 1/4-inch and 3/8-inch threads on the clamp.
- The 2066B is a 9.8-inch arm with 1/4-inch screws at both ends and a 213 g maximum weight recommendation; it does not include a clamp in the described package.
Camera Mounts & Clamps alternative

1,000+ ratings
Read Amazon ReviewsSmallRig 5.5-Inch Adjustable Magic Arm
The 2066B is the longer option for buyers who need more reach and have a light accessory. Consider the 5.5-inch model when a shorter arm fits the rig better and its stated load guidance better matches the accessory.
- This 5.5-inch arm also has 1/4-inch screws at both ends and dual 360-degree ball heads; its description gives a best load of up to 1.5 kg.
- The 2066B extends 9.8 inches and has a maximum weight recommendation of 213 g.
Is SmallRig Magic Arm Worth It?
The SmallRig 2066B is worth considering as a compact, adjustable link for lightweight camera accessories. Its dual ball heads, 9.8-inch length, and cushioned 1/4-inch connection make it practical when a rig already provides compatible mounting points.
Treat the 213 g maximum weight recommendation and the need for matching threaded mounts as the deciding checks.
If your accessory is heavier or you need an attachment clamp included, choose a design whose load guidance and mounting hardware better fit that setup.
Your review at a glance

1,000+ ratings
Read Amazon ReviewsSmallRig 2066B Adjustable Articulating Magic Arm
A flexible short arm for camera creators who need to position a lightweight monitor, light, or microphone from a 1/4-inch mount.
- 9.8-inch articulating arm with a double 360-degree ball-head design.
- 1/4-inch screw threads at both ends for compatible accessories and support points.
- Designed for positioning items such as on-camera flash lights, microphones, LCD monitors, and video monitors.
- An O-ring rubber cushion at the screw is intended to help protect a monitor from scratches and improve the tightness of its connection.