The SmallRig 73.2"/ 186cm Heavy Duty Video Tripod review centers on a tall aluminum support system with a fluid head, adjustable damping, and a dual-mode quick-release mount.
Its design suits video makers who want a dedicated tripod for controlled pans and tilts, provided their camera setup stays within its load limit.
SmallRig AD-01 Review Summary
The quick verdict

700+ ratings
Read Amazon ReviewsSmallRig AD-01 Video Tripod
A fit for video makers who want a full-height aluminum tripod, fluid head, and quick-release compatibility for supported camera setups.
- Adjustable working height from 85 to 186cm (33 to 73 inches).
- Double-tube aluminum legs with a 75mm bowl bottom and built-in bubble level.
- Fluid head with built-in damping and balancing systems, 360-degree horizontal movement, and +90/-60-degree tilt.
- Dual-mode quick-release mount compatible with plates for DJI RS 2, RS 3, and RS 3 Pro, along with an MFT 501-style plate.
Pros
- Tall height range provides room to work from low camera positions through standing-height setups.
- Fluid head movement and damping are tailored to video pans and tilts.
Consider before buying
- The 8kg maximum load calls for checking the complete camera build, including lens and accessories, before purchase.
- Its 85cm minimum height and full-size leg design are less suited to tabletop work or highly compact packing.
Read the full review summary
The AD-01 combines a double-tube aluminum tripod with a 75mm bowl base and fluid head.
Its 85–186cm height range gives operators flexibility from lower setups to a standing-height working position, while the built-in bubble level can help with initial leveling.
The head supports 360-degree horizontal movement and tilt from +90 to -60 degrees, with damping and balancing systems built in.
Its dual-mode quick-release mount is designed to work with plates for DJI RS 2, RS 3, and RS 3 Pro systems as well as an MFT 501-style plate, which may help when moving a compatible setup between support modes.
The stated maximum load is 8kg, so buyers should consider the full camera, lens, and accessory setup together.
A carrying handle and included bag make transport and storage more manageable, though this is a substantial aluminum video tripod rather than a compact travel model.
The buying factors
SmallRig AD-01 Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Height range
The 85–186cm adjustment range covers low-to-tall working positions for a full-size video support.
Video head movement
A fluid head with built-in damping supports 360-degree pans and +90 to -60-degree tilt.
Mount flexibility
The dual-mode plate mount is useful for buyers with compatible DJI RS or MFT 501-style plates.
Support capacity
The stated 8kg maximum load accommodates many camera builds, but heavier rigs need a different capacity class.
Setup stability features
Double-row aluminum legs, a 75mm bowl base, and a bubble level support a sturdy, adjustable setup.
Transport convenience
A carrying handle and included bag help with carrying and storage, while the full-size aluminum design is less compact than travel supports.
Key Features and Specifications of SmallRig AD-01
- Adjustable working height from 85 to 186cm (33 to 73 inches).
- Double-tube aluminum legs with a 75mm bowl bottom and built-in bubble level.
- Fluid head with built-in damping and balancing systems, 360-degree horizontal movement, and +90/-60-degree tilt.
- Dual-mode quick-release mount compatible with plates for DJI RS 2, RS 3, and RS 3 Pro, along with an MFT 501-style plate.
- Maximum load listed as 8kg (17.6lb); check the combined weight of the camera rig and accessories against that limit.
- Package includes a carrying bag, one 1/4-20 screw, one 3/8-16 screw, and a user manual.
Pros and Cons of SmallRig AD-01
Pros
- Tall height range provides room to work from low camera positions through standing-height setups.
- Fluid head movement and damping are tailored to video pans and tilts.
- Dual-mode plate support can simplify transitions for owners of compatible stabilizer plates.
- Aluminum double-tube legs, bowl base, and bubble level provide useful structure for positioning and leveling.
- A carrying handle and included storage bag support transport between locations.
Consider before buying
- The 8kg maximum load calls for checking the complete camera build, including lens and accessories, before purchase.
- Its 85cm minimum height and full-size leg design are less suited to tabletop work or highly compact packing.
- The listed plate modes are specific; buyers using other quick-release systems should confirm plate compatibility before relying on a direct fit.
Who Should Buy SmallRig AD-01?
Good fit
Consider the AD-01 if you need a full-height video tripod and want a fluid head with damping for deliberate pans and tilts.
The broad height range, 75mm bowl base, and bubble level make it a practical format for studio, interview, and location setups where a stable standing-height support is useful.
It is especially relevant if your workflow already uses a compatible DJI RS 2, RS 3, or RS 3 Pro plate, or an MFT 501-style plate.
Before buying, compare the 8kg maximum load with the entire camera configuration and confirm your plate matches one of the supported modes.
Who should skip it
Look elsewhere if you need a compact tabletop tripod, a very short minimum setup, or a lightweight support intended for frequent long-distance carrying. This model's full-size aluminum format prioritizes height and video-oriented movement.
Choose another capacity class if your assembled camera rig exceeds 8kg or leaves little headroom below that limit. Also check your existing quick-release plate standard if you need to change cameras without swapping plates.
How the SmallRig AD-01 Fits a Video Setup
A height range for varied framing
With an adjustable height from 85 to 186cm, the AD-01 spans low camera placements and elevated standing-height positions.
That range is useful when framing needs change across scenes, though its stated minimum height makes it a poor match for tabletop or very low-angle work.
Fluid-head movement and control
The head offers full 360-degree horizontal movement and tilt from +90 to -60 degrees, with built-in damping and balancing systems.
These features are intended for controlled video movement; operators should still consider how their camera and lens balance on the head before a shoot.
Capacity and support structure
Double-row aluminum tubes and a 75mm bowl base give this tripod a substantial support layout, while the bubble level helps with setup alignment.
The 8kg maximum load is the key fit check: include the camera, lens, and any mounted accessories when estimating the working rig.
Plate compatibility and packing
The dual-mode mount is designed around DJI RS 2, RS 3, and RS 3 Pro plates plus an MFT 501-style option.
The handle and included bag help with carrying and storage, but buyers using a different plate system should verify what adaptation their workflow requires.
Alternatives to SmallRig AD-01
Complete Tripod Units alternative

300+ ratings
Read Amazon ReviewsSmallRig x Potato Jet Tribex Carbon II Tripod
Choose the AD-01 if greater maximum height and its 8kg load rating suit your setup.
Consider the Tribex Carbon II if its faster hydraulic leg deployment and carbon-fiber construction better fit your setup and handling priorities; compare its lower height and head capacity with your rig.
- The Tribex Carbon II uses carbon-fiber construction, reaches up to 168cm, and has a 6kg head capacity.
- It features hydraulic leg deployment, a four-step counterbalance, adjustable damping, and compatibility with MFT 501 and DJI RS plates.
- The AD-01 uses aluminum double-tube legs, reaches 186cm, and has an 8kg maximum load with a fluid head.
Complete Tripod Units alternative

1,000+ ratings
Read Amazon ReviewsSmallRig CT-10 Tripod & Monopod
The AD-01 is the more relevant choice for a fluid-head video workflow and greater height. The CT-10 is better suited to buyers who value a compact folding format and monopod conversion for travel or mixed still-photo use.
- The CT-10 is an aluminum ball-head tripod that converts to a monopod, adjusts from 16 to 71 inches, and folds to 16.9 inches.
- Its ball head supports 360-degree rotation, and the listing gives separate load limits for vertical and tilt use.
- The AD-01 is a full-size video tripod with a fluid head, 85–186cm height range, and dual-mode quick-release mounting.
Is SmallRig AD-01 Worth It?
The SmallRig AD-01 is worth considering for video makers who want a tall aluminum tripod, a fluid head with damping, and plate compatibility that matches their equipment.
Its height range, leveling aid, and included carrying bag make it a capable feature set for full-size camera support.
Check the complete rig against the 8kg load limit and confirm your quick-release plate before choosing it. Buyers who need very low positioning, compact packing, or a different plate workflow should compare other support designs.
Your review at a glance

700+ ratings
Read Amazon ReviewsSmallRig AD-01 Video Tripod
A fit for video makers who want a full-height aluminum tripod, fluid head, and quick-release compatibility for supported camera setups.
- Adjustable working height from 85 to 186cm (33 to 73 inches).
- Double-tube aluminum legs with a 75mm bowl bottom and built-in bubble level.
- Fluid head with built-in damping and balancing systems, 360-degree horizontal movement, and +90/-60-degree tilt.
- Dual-mode quick-release mount compatible with plates for DJI RS 2, RS 3, and RS 3 Pro, along with an MFT 501-style plate.